Detailed Product Description

How to program features by remote
1. Entry the valet mode, see override switch function.
2. Depress override switch for 5 seconds. The system
responds with honking and stop when release override
switch, the system entry the program mode now.
3. Press override switch and counting the number of program,
the system will advise you the original program with one or
two chirp. Now you can press lock button (with one chirp )or
unlock button (with two chirp) to select the feature you want
and same process to program other features. (See Feature
Selection Table)
4. Turn ignition off to save new program.
5. Exit the valet mode.

Relay kit option:
RS 15A : 15A-relay kit
RS 30A : 30 / 40A start kill relay kit.
Contact your supplier for detail

Override switch functions:
1. Emergency disarm (Unlock):
Turn ignition on and depress override
switch for 1 sec to disarm the system
in case loose the transmitter.
2. Override mode:
When the system disarmed turn
ignition on and press override switch
for 5 times, parking light flash 2 times,
LED steady on, start kill inhibit. When
ignition on depress override switch 5
times again to exit override mode.
3. Code learning:
Turn ignition on and keep pressing
override switch for 5 sec while
disarmed. It comes with 5 chirps,
LED steady on, means the system is
in code learning mode, press any
button on the first transmitter within 5
seconds, then with 1 chirps means
learning 1st transmitter success and
waiting for the second learning
transmitter, the system can learning
code up to 4 transmitters.

Two button feature:
Button: Lock / Panic (1.5 sec)
Button: Unlock (silence) / AUX.1 (0.75 sec)
**AUX.2 (Within 5 sec. After Unlock)
Four button feature:
Button I: Lock / Panic (1.5 sec)
Button II: Unlock / AUX.1 (0.75 sec)
**AUX.2 (Within 5 sec. After Unlock)
Button III: Lock / Unlock (silence)
Button IV: AUX.1 (0.75 sec)